Z-4TC 4-CH Thermocouple /MV Input Module / RS485 Modbus RTU

The Z-4TC module acquires up to 4 single-ended signals (voltage-type, from the: signal generator or thermocouple) and it converts them to a digital format using the Modbus RTU Protocol. A double serial interface (RS232 or RS485) it’s also available (Modbus RTU protocol).

Talk to Our Experts Download Datasheet

  • Internal Cold Junction compensation
  • Easy configurable by free configuration software ”Easy Setup”
  • RS485 serial communication with MODBUS-RTU protocol, maximum 32 nodes.
  • RS232 serial communication with Modbus RTU protocol for registers access and configuration
  • Measuring mode Thermocouples or Voltage

  • Configuration of a filter applied to each input signal
  • Possibility to disable the automatic detection of thermocouple interruptions (to decrease the measure error of the acquired signals from the thermocouples)
  • Possibility to add/remove the module to/from RS485-bus without disconnecting the communication or power supply
  • Easy-wiring of power supply and serial bus by means of the bus housed in the DIN rail.

  • Output Number : 4 Resolution : 16 bits (15+1 sign)
  • Configurable between : 0(no filter is applied), from 1(min) to 6(max)
  • Accuracy Initial : 0.1% of E.E.S.(Electrical End Scale)

See Related Products

RS485↔RS485 serial isolator/amplifier K107A

RS485↔RS485 serial isolator/amplifier K107A

PT1000 to DC current/voltage isolator/converter K109PT1000

PT1000 to DC current/voltage isolator/converter K109PT1000

PT1000 to DC current/voltage isolator/converter K109PT1000 (Copy)

PT1000 to DC current/voltage isolator/converter K109PT1000 (Copy)

Multifunction Power Meters S711B

Multifunction Power Meters S711B