EQMS - Effluent Quality Monitoring System

E-House Systems

Analyzer Shelter

GAS Analysis System / CEMS - Continuous Emission Monitoring System

SWAS - Steam and Water analysis system

Weather Station

E-House Systems

Analyzer Shelter

Aspiration System

Auto Change Over Unit

Calibration Unit For Zirconia Oxygen Analyzer

Close Loop Sample Handling System

Double Block and Bleed System

Fast Loop System For MS - HSD

GAS Analysis System / CEMS - Continuous Emission Monitoring System

Liquid Sample Recovery System

Purge Panels

Safe Area / Explosion proof HVAC

Single Line SWAS

SWAS - Steam and Water analysis system

Validation system for HC liquid

Sulphur Recovery Unit

Hot Extractive Analyzer CEMS System

Blending Analyzer System

Flue Gas Desulphurization

Extractive Dilution CEMS

Ambient Air Quality Monitoring System

High-Performance Fan Heater DCR 130

The compact high-performance fan heater DCR 130 prevents the formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or electronic hygrostat. The model with the thermostat is available with an internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 130 was designed for wall fixing. For fixing on the bottom of the enclosure the fan heater DCR 030 is recommended.

Talk to Our Experts Download Datasheet

High DC heating performance
Integrated adjustable thermostat or hygrostat
Small hysteresis
Integrated switch module
Panel or DIN rail mounting
Optical indicator (LED)

High DC heating performance
Integrated adjustable thermostat or hygrostat
Small hysteresis
Integrated switch module
Panel or DIN rail mounting
Optical indicator (LED)

Heating element : High performance cartridge
Overheat protection : With automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure
Axial fans, ball bearing : Service life 50,000 h at 77 °F (25 °C)
Housing
plastic, UL 94V-0, black
Connection : 2-pole “Push-In “connection clamp stranded wire1 AWG 16 (1.5 mm²) with strain relief; max. AWG 12 (2.5 mm²)
Operating/Storage temperature : -4 to +167 °F (-20 to +75 °C)
Protection type/Protection class : II (double insulated) / IP20
Dimensions : 3.9 x 6.6 x 7.0" (99 x 168 x 179 mm)

High-Performance Fan Heater DCR 130

Features

Advantages

Specifications

See Related Products

Talk to a Product Expert

Fill up the Form and Download Datasheet